Electrical equipment
Motor-core steel, conductors and components for motors, generators, switchgear and electrical assemblies — exported directly from China to India and other overseas markets.
Materials that carry flux, current and load
Electrical equipment combines three groups of material. Motor and generator cores are stacked from non-grain-oriented electrical steel laminations; windings, busbars and connections use copper or aluminum; and housings, enclosures and panels are usually formed from cold-rolled sheet.
Most buyers purchase to their own drawings and standards, so an enquiry is most useful when it states the grade or designation, the dimensions and the test documents required with delivery.
- Magnetic coresNGO laminations for rotating machines.
- ConductorsCopper and aluminum for windings and busbars.
- Enclosures & partsCR sheet, bearings and hardware.
Industry focus, wording and typical materials — client to confirm.
Materials typically specified for electrical equipment
Each card links to the matching product family. Grades, sizes and terms are agreed per enquiry.
01CRNGO / NGONon-grain-oriented electrical steel
Typical useStator and rotor laminations for motors, generators and alternators.
Buyers specify
- Grade
- Thickness mm
- Max core loss W/kg
- Polarization T
- Coating
02Non-ferrousCopper
Typical useWindings, busbars, contacts and connections.
Buyers specify
- Form
- Grade / temper
- Dimensions mm
- Conductivity
- Packaging
03Non-ferrousAluminum
Typical useRotor cages, busbars, conductors and housings.
Buyers specify
- Alloy / temper
- Form
- Dimensions mm
- Surface
- Packaging
04CR · SteelCold-rolled steel coils
Typical useEnclosures, cabinets, panels and pressed parts.
Buyers specify
- Grade
- Standard
- Thickness × width mm
- Surface
- Coil ID / weight
05ComponentsBearings
Typical useShaft bearings for motors, generators, pumps and fans.
Buyers specify
- Designation
- Type
- d × D × B mm
- Seal / clearance
- Brand
Where these materials are used
Typical uses in general — not a list of client projects or customers.
- 01
Industrial motors
Stator and rotor cores, shafts and housings.
NGO · Copper · Bearings - 02
Generators & alternators
Rotating machines for standby and continuous power.
NGO · Copper - 03
Switchgear & panels
Busbars, enclosures and mounting hardware.
Copper · CR · Hardware - 04
Small transformers & ballasts
Cores where the flux direction changes.
NGO · Copper - 05
Household appliances
Motors, panels and casings.
NGO · CR · Aluminum - 06
Pumps, fans & compressors
Drive motors and rotating parts.
NGO · Bearings
Application descriptions are general. Photos are illustrative and do not show client facilities or customers.
Buyers in this industry often ask…
Short, honest answers. Anything that depends on policy — MOQ, Incoterms, payment, lead time — is confirmed per enquiry.
01Do you publish CRNGO grade data?
NGO grade data is in preparation and not yet published. Send the grade, or the core-loss and polarization you need, and the request will be reviewed against available supply.
02Can copper be supplied as strip, wire or busbar?
Forms, sizes and tempers are confirmed per enquiry. State the form, dimensions and any conductivity requirement.
03Can I order bearings by designation?
Yes. Quote the full bearing designation including suffixes for seals, clearance and cage. Available brands are confirmed per enquiry.
04Can you quote to our drawings?
Drawings and specification sheets can be attached to the request for quotation and are reviewed with the enquiry.
05Which test documents are available?
Test certificates and inspection documents are available on request where supplied by the manufacturer.
Commercial information and downloads
Commercial terms are quoted per enquiry. Documents are published once supplied and approved.
Commercial information
- Minimum order quantity
- On request
- Incoterms
- On request
- Lead time
- On request
- Payment terms
- On request
- Export markets
- India & other overseas markets
Documents
All technical resourcesMill test certificate (per shipment)
Available on request where supplied by the manufacturer.
Sourcing materials for motors or switchgear?
Send the materials, grades or designations, dimensions, quantities and destination. Your industry is pre-filled in the request form.